Doing a walk-around before departing in your RV is a critical safety step that helps prevent costly damage and dangerous mistakes. Here's a simple guide to what you should check every single time before hitting the road:

RV Walk-Around Checklist 1. Exterior Visual Inspection

• Look for anything hanging, loose, or damaged.
• Check for fluid leaks beneath the RV.

2. Slide-Outs

• Make sure all slide-outs are fully retracted and locked.
• Confirm slide topper awnings are retracted properly.

3. Steps & Awnings

• Retract electric/manual steps completely.
• Retract all awnings and ensure they are locked in place.

4. Antennas & Vents

• Lower TV, satellite, or Wi-Fi antennas.
• Close all roof vents, windows, and skylights.

5. Doors & Storage Compartments

• Confirm all storage compartment doors are latched and locked.
• Check that the main entry door is secure.

6. Connections & Hoses

• Disconnect and stow:
  • Electrical cord
  • Freshwater hose
  • Sewer hose
  • Any cable/satellite connections

7. Tires

• Check for proper inflation.
• Look for cracks, bulges, or visible damage.
• Make sure lug nuts are tight.

8. Towing or Tow Vehicle

• Double-check tow bar, hitch pins, safety chains, and brake connections.
• Test trailer brake lights and signals.

9. Chocks & Leveling Gear

• Remove all wheel chocks.
• Retract stabilizer jacks and leveling blocks.

10. Lights and Signals

• Test brake lights, turn signals, and running lights.
• Replace any non-functioning bulbs before departure.

Bonus Tip: Keep a Laminated Walk-Around Card

Attach it near the RV door or steering wheel to ensure you never forget a step.